成功在skyeye 1.2.4上跑起来vxworks 5.5欢迎交流开发经验

成功在skyeye 1.2.4上跑起来vxworks 5.5欢迎交流开发经验

vxworks 5.5 tornado 2.2 for arm bsp csb337 仿真at91rm9200
skyeye.conf

cpu:  arm920t
mach: at91rm92
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=R, addr=0x00100000, size=0x00010000
mem_bank: map=M, type=RW, addr=0x20000000, size=0x02000000
#mem_bank: map=M, type=RW, addr=0xc0200000, size=0x00800000#, file=./initrd.img
#mem_bank: map=M, type=RW, addr=0xc0a00000, size=0x00900000
mem_bank: map=I, type=RW, addr=0xfffa0000, size=0x00060000
#dbct:state=on

1.2.4要修改一点，要不输入没有反映mach 9200的c文件中io_do_cycle中 if( (((io.uart.cr & 0x30) >> 4)) == 0x1 ) /* If RX is enabled */原来是＝＝0x2

skyeye －e vxWorks