求助：不能发现模块文件DAC0832.MDF
字体: 小 中 大 | 打印 发表于: 2008-9-28 08:41 作者: banaba 来源: proteus仿真社区
SIMULATION LOG
==============
Design: C:\Documents and Settings\Administrator\桌面\锯齿波\锯齿波\DA_tran_dent.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 08/06/09
Modified: 01/06/24
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
ERROR [LINKER] : Cannot find model file 'DAC0832.MDF'.
WARNING [LINKER] : Unresolved module pin 'U2_DI0'.
WARNING [LINKER] : Unresolved module pin 'U2_DI1'.
WARNING [LINKER] : Unresolved module pin 'U2_DI2'.
WARNING [LINKER] : Unresolved module pin 'U2_DI3'.
WARNING [LINKER] : Unresolved module pin 'U2_DI4'.
WARNING [LINKER] : Unresolved module pin 'U2_DI5'.
WARNING [LINKER] : Unresolved module pin 'U2_DI6'.
WARNING [LINKER] : Unresolved module pin 'U2_DI7'.
WARNING [LINKER] : Unresolved module pin 'U2_$WR1'.
WARNING [LINKER] : Unresolved module pin 'U2_$CS'.
WARNING [LINKER] : Unresolved module pin 'U2_RFB'.
WARNING [LINKER] : Unresolved module pin 'U2_IOUT1'.
WARNING [LINKER] : Unresolved module pin 'U2_VCC'.
WARNING [LINKER] : Unresolved module pin 'U2_ILE(BY1/$BY2$)'.
WARNING [LINKER] : Unresolved module pin 'U2_VREF'.
WARNING [LINKER] : Unresolved module pin 'U2_IOUT2'.
WARNING [LINKER] : Unresolved module pin 'U2_$XFER'.
WARNING [LINKER] : Unresolved module pin 'U2_$WR2'.
Simulation FAILED due to netlist linker error(s).
刚刚安装的proteus，不知道这个模块怎么加上去
最新回复
hwg_xhu (2008-9-28 11:25:28)
budhy (2008-9-28 11:33:56)
QUOTE:
DAC0832 应该不需要 DAC0832.MDF， 不知你用的是哪一版本的 Proteus。把你的仿真图船上来吧，我帮你查查看。